Enjoy complimentary standard shipping on all orders.
Enjoy complimentary standard shipping on all orders.
Find a suitable location for your BubbaRubba. Mark a small pencil dot at 60 inches from the floor on the very corner. This will mark where the top of the BubbaRubba will go. 60 inches covers most average heights. You may want it higher or lower. Adjust the mark if necessary before application to wall. Affix the 10 adhesive pads to your BubbaRubba, Place one at each corner, close to the edge and place the remaining pads equally between the corner pads. Before exposing the adhesive, make a trial fit to your wall to be sure this is where you want to set the BubbaRubba. REMEMBER ONCE PLACED IT IS NOT EASILY MOVED. Peel the backing off the adhesive pads; place the top of the BubbaRubba on the pencil mark while holding the bottom away from the wall making sure of proper alignment. Push the. top all the way in so the plastic indexes the corner and fits against the wall. Slowly move the bottom in until it indexes the corner. Once in place, push the adhesive pads so they firmly adhere your BubbaRubba to the wall. firmly adhere your BubbaRubba to the wall.
Start by removing the backing off of one pad at a time and placing it on the inside of the back scratcher in the space between the bumps starting at the top corner then do the opposite side, now do the opposite end. Now place a pad in the center of the backscratcher between the pads already installed, do the opposite side. Finally place the remaining pads in between the spaces between the six pads already installed so the ten pads are evenly spaced along both sides of the back scratcher, five on each side evenly spaced down both sides.
The BubbaRubba may be screwed to the surface with small pan head screws. We do not recommend wood screws or countersink headed screws as the tend to spread the plastic. Use a small drill bit and place holes where the adhesives pads would be placed and screw back scratcher to the wall door jamb or where ever you'd like. some corners have metal corner embedded in the drywall and should be drilled as well to secure the device in place.
The adhesive pads are:
Scotch 859 Removable Clear Mounting Squares
These are available at most Walmart stores as well as online at
Samsclub.com and others.
Copyright © 2023 BubbaRubba.com - All Rights Reserved.
TAILWINDS RC HOBBY CENTER, JACKSON MO USA